How to use Qualcomm Flash Image Loader (QFIL)



These are the instructions on How to use Qualcomm Flash Image Loader (QFIL) tool to flash stock firmware on any Qualcomm Device.
Requirements: This tool only works on Qualcomm Device only. If in case you have a device which is not powered by Qualcomm Chipset then this will not work for you.

Use Qualcomm Flash Image Loader (QFIL)

  • Download and install Qualcomm USB Driver on your Computer (if you have already installed the Qualcomm USB Driver on your Computer then SKIP this step).

  • Download and extract Qualcomm Flash Image Loader (QFIL) on your computer. After extracting, you will be able to see the following files:

  • Now, Open QFIL.exe.

  • Once QFIL is launched, you will be able to see the following screen on your computer:



  • Now, Switch Off your Smartphone or Tablet.

  • Once your Device is Switched Off, Press and Hold Volume UP Key and Connect the Device to the Computer using USB Cable.
  • Now, In QFIL, Click on Browse Button and locate the Firmware (.mbn).

  • Once, you have added the firmware file, QFIL will automatically load the rest of the firmware data.
  • Now, Click on the Download button to begin the Flashing Process.

  • Flashing Process may take up to 10-15 minutes to complete.
  • Once Flashing process completed your device will be reboot automatically.

 

That’s It; We are done! Now disconnect your device from the computer and setup everything on your device to use it.





2017-08-28T08:23:51+00:00 August 28th, 2017|How To Guide|0 Comments

Leave A Comment