Infinix Joypad 8s X801 8 Android 4.2.1 Firmware Flash File



Infinix Joypad 8s X801 8 Android 4.2.1 Firmware Flash File



Initial Steps to Install Firmware on Infinix Joypad 8s X801 8  

Download and install MTK  Android USB drivers

Download And Install SP Flash Tool



How To Flash Infinix Joypad 8s X801 8

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/ROM for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.

Might Also Like:

Infinix Hot 4 Pro X556 MT6737 Firmware Flash File

Infinix Zero 2 x509 (16 gb) Firmware Flash File

Download Link



2017-07-04T09:55:47+00:00 July 4th, 2017|Infinix Mobile|0 Comments

Leave A Comment